We supply and install Belden specification-grade structured cabling for commercial, data centre, and industrial infrastructure projects across Dubai and the UAE — Cat6A and Cat6 copper cabling, Belden fiber optic cable, and Hirschmann industrial Ethernet cable for environments where cable performance and quality documentation are project specification requirements, not afterthoughts.
Belden has been manufacturing specification-grade signal transmission cable for over 100 years. In the structured cabling world, Belden is positioned as the premium specification-grade tier — cables produced to tighter tolerances than the industry minimums, with comprehensive performance test documentation at the factory, and backed by Belden's 25-year infrastructure warranty when installed by a Belden Channel Partner. When Dubai project consultants specify cabling that must meet not just category compliance but margin-above-floor performance, Belden is consistently the premium-tier choice.
Belden also manufactures the Hirschmann and Lumberg Automation industrial Ethernet cable ranges — rugged Cat5e, Cat6, and Cat6A variants with IP-rated connectors and oil and chemical resistant jacket materials for industrial environments including the manufacturing, oil and gas facilities, and process automation sectors operating in Dubai's industrial zones such as JAFZA and Dubai Industrial City.
Belden 10GX series Cat6A UTP cable — the industry-leading unshielded Cat6A solution. 23AWG solid conductor, specifically engineered for reduced Alien Crosstalk (ANEXT) without requiring overall shielding. 40% smaller outer diameter than typical Cat6A UTP, enabling higher conduit fill density. Meets TIA-568-C.2 Class EA/Cat6A and ISO 11801 standards with significant performance margin above minimum requirements. Belden's most commonly specified Cat6A product for Dubai office and commercial projects.
Belden Cat6A F/UTP for environments where electromagnetic interference (EMI) is a concern — manufacturing floors, electrical plant rooms, comms rooms adjacent to large UPS systems, or in cable containment shared with power infrastructure. Foil screen (F/ prefix) runs the full cable length, providing consistent EMI shielding. Requires shielded keystone modules and patch panels and a correctly grounded installation for the shielding to be effective.
Belden 1583A and 1872A Cat6 UTP — the standard Belden entry for projects specifying Cat6 performance. Factory-verified to TIA-568-C.2 Cat6 with full documented performance margin above the standard minimum. Available in multiple jacket materials: standard PVC, low-smoke zero-halogen (LSZH) for enclosed-space fire safety compliance, and plenum (CMP)-rated for US fire code in air-handling spaces. Belden's reputation for consistent lot-to-lot performance makes it a preferred brand for large-volume cable pulls where performance consistency across a reel matters.
Belden KeyConnect modular keystone modules — Cat6A and Cat6 UTP and FTP variants. Tool-free BIX-style termination. Available in T568A and T568B wiring. Compatible with standard UK, European, and US face plate formats. Belden 24-port and 48-port loaded and unloaded patch panels accepting KeyConnect modules. The complete Belden Systimax/KeyConnect cabling system when combined with Belden DataTwist cable and Belden factory-terminated patch cords.
Belden FREEDM indoor fiber cable and FiberExpress BladePatch high-density fiber management for intra-building and data centre fiber backbone applications. OS2 single-mode and OM3/OM4 multimode variants. Tight-buffered indoor construction for easy installation and termination. LSZH jacket options. Used for backbone runs between comms rooms (MDF to IDFs), data centre inter-rack fiber, and horizontal fiber to desktop where 10GbE copper distances are insufficient. (See also our Corning and Opterna pages for dedicated fiber cabling.)
Belden/Hirschmann industrial Ethernet cable — Cat5e (HIRSCHMANN) and Cat6 (GigE) variants with oil-resistant PUR outer jacket, temperature range -40°C to +90°C, and resistance to industrial chemicals. M12 D-coded and RJ45 IP67 pre-assembled cordsets for direct connection to industrial equipment. Specified for Dubai industrial zone facilities where standard structured cabling products would fail due to chemical splash, flexible cable routing on moving machinery, or extreme temperature exposure.
Many Dubai projects specifying Belden cabling do so within a broader infrastructure specification document prepared by a consultant. We review the specification to confirm the correct Belden cable series, connector variant, jacket material, and performance class — distinguishing between, for example, a Belden 10GX Cat6A UTP and a Belden 2400 Cat6A F/UTP requirement, which are different products with different installation requirements. We flag any ambiguities before procurement and installation begin.
Belden's performance warranty requires installation to controlled practices: no crushing, no tight stapling, minimum bend radius maintained throughout the run, separation from power cables maintained per TIA-569 requirements, and terminated correctly using the specified connector type. We maintain these practices across every Belden installation, as warranty claims require evidence of correct installation practice from the certification test report.
All Belden structured cabling installations are certified with Fluke Versiv CableAnalyser — every permanent link tested to TIA-568 or ISO 11801 Cat6 or Cat6A grade with results recorded. For projects qualifying for Belden's 25-year extended application warranty, all test data and installation records are submitted to Belden through the Belden Partner registration programme. Warranty certificate issued to the client naming the specific installed system at the project address.
A structured cabling installation is expected to remain in service for 15–25 years, supporting multiple generations of network equipment. Budget-grade cables that pass Cat6 testing on the day of installation with minimal margin can fail when reterminated, when ambient temperature increases, or when cable is disturbed during a building renovation — resulting in network faults that are difficult to diagnose and expensive to rectify behind ceilings and floor finishes.
Belden cables installed with margin above the TIA minimum provide headroom for the real-world degradation that occurs over a 20-year service life in a Dubai commercial building. The premium at installation is a fraction of the cost of recabling when a budget installation fails after 6 years.
Belden Cat6A for 10GbE server and switch connections. BladePatch high-density fiber management for inter-rack connectivity. Factory-terminated patch cords for consistent performance at every port. Full test documentation for data centre commissioning and handover records.
Belden 10GX Cat6A UTP for consultant-specified premium-grade office cabling. LSZH jacket for fire compliance in air handling spaces. Full 25-year warranty registration. Belden KeyConnect outlets integrated with specified face plate hardware.
Belden/Hirschmann industrial Ethernet cable for factory floor automation and control system networking in Dubai industrial zone facilities. IP67-rated M12 pre-terminated cordsets. Resistance to hydraulic fluid, cutting oils, and cleaning chemicals encountered in manufacturing environments.
Belden LSZH Cat6A for hospital infrastructure where low-smoke emissions in corridors and patient areas are a life-safety requirement. Full certified test documentation for healthcare facility IT infrastructure commissioning records. ANEXT compliance for 10GbE medical imaging data transmission.
Belden Cat6A shielded (F/UTP) for trading floor environments with high-density UPS and power management equipment generating EMI. Consistent latency performance across all cable runs where trading application latency is a performance-critical requirement.
Belden security-rated cables and connectors for government and defence environments requiring component-level documentation of cable manufacturing provenance. Country-of-origin documentation available for UAE government procurement compliance requirements.
Share your project specification or describe your cabling requirements. We'll confirm the correct Belden product references and provide a full supply and installation quote with 25-year warranty registration.
Request a Free Cabling Quote